How to Replace Power Window Switch on a 2015 Town & Country

If the passenger-side power window in your 2015 Chrysler Town & Country has stopped working, a faulty power window switch is often the culprit. This is especially true if the window can be operated by the driver’s side master switch, but not by the switch on the passenger door. You might be able to lower the window but not raise it, or vice versa, which is a classic symptom of a failing switch. The good news is that this is a simple and quick DIY fix that you can complete in minutes.

The Solution: A Quick Fix for Your Power Window

You can easily replace the power window switch in your 2015 Chrysler Town & Country in about 10 minutes, saving you time and money compared to a trip to the repair shop.

Parts & Tools You’ll Need:

• Replacement power window switch: Make sure you find one that is compatible with your vehicle.
• Plastic pry bar

Power Window Switch Door Lock Switch Front Passenger Side Compatible with Dodge Grand Caravan Chrysler Town & Country Jeep Liberty Nitro Ram1500 Journey Replaces 4602544AG

Buy Now

Step-by-Step Instructions

1. Locate the Switch: The power window switch is located on the armrest of the passenger door.
2. Pry It Out: Use your plastic pry bar to carefully pry up the entire switch assembly. Start at one end and gently work your way around until the clips release.
3. Disconnect the Cable: Once the switch is loose, tilt it up to reveal the electrical connector underneath. There’s a small clip on the connector—press it to release the cable from the old switch.
4. Connect the New Switch: Take your new power window switch and securely plug the electrical cable into it. You should hear a click when it’s properly connected.
5. Snap It in Place: Place the new switch into the opening on the door panel and press down firmly until it snaps into place.

Tips for a Smooth Installation

• Be Gentle: A plastic pry bar is key to avoiding damage. Take your time and don’t use excessive force.
• Check the Connection: Before snapping the new switch in, make sure the electrical connector is fully seated. A loose connection means the switch won’t work.
• Test It Out: Once the new switch is installed, test the window to make sure it’s working correctly in both directions.

Project Overview

• Total Time: 5-10 minutes
• Cost: Under $20, depending on where you buy the part
• Skill Level: Beginner

Related posts:

Excellent Key Fob Replacement for 2015 Chrysler Town & Country Revving Up Repairs: Zip Tie Hacks for Auto Repair How to Replace Ford F53 Fan Clutch on Motorhome Chassis How to Test and Replace Battery on Volkswagen ID.4 Key Fob